SCOPE v5.0 Software is available! Windows XP, Vista and Windows 7 compatible SCOPE v5.0 comes with an updated but well known application interface and with several updated and new devices. The main challenge during the development of SCOPE v5.0 was to adopt and re-engineer the application and DSP code basis to a new development environment which works with Vista, Windows 7 and of course with the architecture of our new hardware. These are the main changes in SCOPE v5.0: - WinXP 32, Vista 32 and Windows 7 (32Bit) support
- New drivers for ASIO, WAVE and SCOPE hardware
- New SC channelstrip EQ
- New SC channelstrip dynamics
- New channelstrip SC-SL9000
- New reverb effects: LX-Bundle, SC-RMX 160, 5.1 surround reverb
(LX-effects are 4 high quality effects that need much DSP Power. Therefore not all effects can be loaded on 3- or 4-DSP systems.) SCOPE V5.0 UPGRADE The software update will be free for you, if... - you bought SCOPE v4.5 on or before 31th December 2007
- or you bought SCOPE v4.5 on or after 1st January 2008 from the SONIC CORE site and received your special update code from us for free
- or you bought SCOPE v4.5 on or after 1st January 2008 with a SCOPE PCI board at one of our distribution partners
SCOPE v4.5/v5.0 Upgrade for boards with 3 or 4 DSPs For Luna, PowerSampler, Electra and Pulsar 4DSP - Configuration software (v4.5/v5.0)
SONIC CORE DSP Plug-ins: - Mixing: STM2448, STM4896, STM 48 S, STM 1632, STM 16 S, Dynamic Mixer, Micromixer, Channel, Meterbridge, ControlRoom
- Reverb: MasterVerb Pro, MasterVerb, MasterVerb Classic, Early Reflector
- Dynamics: Compressor, Limiter, Gate, Expander
- Filter: GraphEQ, Parametric EQ, 4-Pole Filter, High Cut Filter, Low Cut Filter, DC Filter, MIDIPole Filter
- Chorus: Chorus, 4-Tap Chorus, Harmonic Chorus, Hexa Chorus, Master Chorus
- Flanger: Flanger, Harmonic Flanger, Master Flanger, Space Flanger, Random Flanger, Step Flanger
- Phaser: Phaser, SSB Phaser, SSB Modulator, SSB Mod Delay
- Delay: Delay, Ducking Delay, Pattern Delay, Multi Tap Delay, Delay LCR, Delay Long, Dual Delay Long
- Mastering: Dither Shaper, Stereo Expander, Softclip, Spectral Balance Control
- Distortion: Distortion, Overdrive, Tube Drive, TQ Drive, Resonator
- Modulation: AutoPan, AutoWah, Tremolo, MIDI Tremolo
- Tools: AuxRack, MultiFX, Deesser, Ducker
- SpecialFX: Vocoder III, Ringmodulator, Pitchshifter
- Synthesizer: SB404, Poison, EDS 16i, EDS 8i, BlueSynth, EZSynth, miniscope, U KNOW 007, Vectron Player, Inferno, Lightwave, Prisma, Arpeg01
- Sampler: STS-2000P, STS-3000, STS-4000
SCOPE v4.5/v5.0 Upgrade for boards with 6 DSPs For SCOPE Project - Configuration software (v4.5/v5.0)
SONIC CORE DSP Plug-ins: - Mixing: STM2448, STM4896, STM 48 S, STM 1632, STM 16 S, Dynamic Mixer, Micromixer, Channel, Meterbridge, ControlRoom
- Reverb: MasterVerb Pro, MasterVerb, MasterVerb Classic, Early Reflector
- Dynamics: Compressor, Limiter, Gate, Expander
- Filter: GraphEQ, Parametric EQ, 4-Pole Filter, High Cut Filter, Low Cut Filter, DC Filter, MIDIPole Filter
- Chorus: Chorus, 4-Tap Chorus, Harmonic Chorus, Hexa Chorus, Master Chorus
- Flanger: Flanger, Harmonic Flanger, Master Flanger, Space Flanger, Random Flanger, Step Flanger
- Phaser: Phaser, SSB Phaser, SSB Modulator, SSB Mod Delay
- Delay: Delay, Ducking Delay, Pattern Delay, Multi Tap Delay, Delay LCR, Delay Long, Dual Delay Long
- Mastering: Dither Shaper, Stereo Expander, Softclip, Spectral Balance Control
- Distortion: Distortion, Overdrive, Tube Drive, TQ Drive, Resonator
- Modulation: AutoPan, AutoWah, Tremolo, MIDI Tremolo
- Tools: AuxRack, MultiFX, Deesser, Ducker
- SpecialFX: Vocoder III, Ringmodulator, Pitchshifter
- Synthesizer: SB404, Poison, EDS 16i, EDS 8i, BlueSynth, EZSynth, miniscope, U KNOW 007, Vectron Player, Inferno, Lightwave, Prisma, Arpeg01
- Sampler: STS-2000P, STS-3000, STS-4000
Choose between Mix'n'Master Pack 2 and Synth'n'Sampler Pack 2 - Mix'n'Master Pack 2: Optimaster, PSY Q, Vinco, Interpole, VDAT, Vocodizer
- Synth'n'Sampler Pack 2: Minimax, Profit 5, B2003, Modular III, Vectron, STS-5000
SCOPE v4.5/v5.0 Upgrade for boards with 14 or 15 DSPs For SCOPE Professional - Configuration software (v4.5/v5.0)
SONIC CORE DSP Plug-ins: - Mixing: STM2448, STM4896, STM 48 S, STM 1632, STM 16 S, Dynamic Mixer, Micromixer, Channel, Meterbridge, ControlRoom
- Reverb: MasterVerb Pro, MasterVerb, MasterVerb Classic, Early Reflector
- Dynamics: Compressor, Limiter, Gate, Expander
- Filter: GraphEQ, Parametric EQ, 4-Pole Filter, High Cut Filter, Low Cut Filter, DC Filter, MIDIPole Filter
- Chorus: Chorus, 4-Tap Chorus, Harmonic Chorus, Hexa Chorus, Master Chorus
- Flanger: Flanger, Harmonic Flanger, Master Flanger, Space Flanger, Random Flanger, Step Flanger
- Phaser: Phaser, SSB Phaser, SSB Modulator, SSB Mod Delay
- Delay: Delay, Ducking Delay, Pattern Delay, Multi Tap Delay, Delay LCR, Delay Long, Dual Delay Long
- Mastering: Dither Shaper, Stereo Expander, Softclip, Spectral Balance Control
- Distortion: Distortion, Overdrive, Tube Drive, TQ Drive, Resonator
- Modulation: AutoPan, AutoWah, Tremolo, MIDI Tremolo
- Tools: AuxRack, MultiFX, Deesser, Ducker
- SpecialFX: Vocoder III, Ringmodulator, Pitchshifter
- Synthesizer: SB404, Poison, EDS 16i, EDS 8i, BlueSynth, EZSynth, miniscope, U KNOW 007, Vectron Player, Inferno, Lightwave, Prisma, Arpeg01
- Sampler: STS-2000P, STS-3000, STS-4000
- Mix'n'Master Pack 2: Optimaster, PSY Q, Vinco, Interpole, VDAT, Vocodizer
- Synth'n'Sampler Pack 2: Minimax, Profit 5, B2003, Modular III, Vectron, STS-5000
DOWNLOAD We provide the Software SCOPE v5.0 for PCI boards for download: Download-Area REGISTRATION For SCOPE v5.0 you will need a new registration. Please submit your hardware serial number(s), or even better your key file "scope.rgy" or "allkeys.skf" by email to register@soniccore.de We will try to handle to your Registration request as fast as possible. You will receive a file containing the SCOPE v5.0 product activation for all Plug-ins and DSP-Systems according to your registration. REPORTS Please send your feedback regarding errors or improvements to bugs@soniccore.de SUPPORT If you want us to help, please contact: Support & Service.
|